1. Voice trigger (sound activation), the device will be under recording when there is voice around the device
2. Support motion detection
3. A unique design, Hidden easily
4. High-definition camera, much clearer picture and video; 
5. Audio and video recording synchronization; 
6. Video Resolution 720 * 480 pixels, 30fps; 
7. Built-in high-performance rechargeable lithium ;
8.Supports AVI video format
9.Supports USB1.1/2.0
10.Built-in lithium rechargeable battery lasting for 2 hours
11.Easy operation with LED indicator

Features: 
Thumb size alloy housing
Manually and sound activated recording
Web camera for online video chat
Supports AVI video format
Low illumination, high resolution image with 2,000K pixels
High speed recording and quick light response
30 frames per second for 720 x 480 video output
Supports USB1.1/2.0
Supports 8GB microSD card (max)
Built-in lithium rechargeable battery lasting for 2 hours
Easy operation with LED indicator
Flexible installation with clip and bracket

Function: 
Mini size easy to carry
Pinhole lens easy to hide
Integrated alloy housing fashion outlook
2,000K pixels high resolution
Low illumination for night operation
AVI format
LED indicator
Easy operation


Use:
(1)Turn on the camera
There are 2 button near the USB slot.Pull the upper button down,then you can see the LED is blue.It indicates the camera is on and go into the standby status.

(2)How to take a picture
There are three button in the camera,only the top one is avaible.
After you turn on the camera,you just need to press the top button ,the LED will be yellow,then blue.A picture is taken and saved.

(3)How to record
After you turn on the camera,you only need to press the top button for about 3 seconds,then the blue LED will flash 3 times and off.It indicates the camera is recording.If you want to save it,you just need press the top button ,the blue LED will be on .It indicates you save the vedio.

(4)About the vioce-activated function
Turn on the camera and the vioce-cctivated button,if there is voice around the camera,the blue LED will flash 3 times and start record automatically.

Note:Please make sure that the camera is on when it is connected with the computer to read the memory.